| SKU BMW-No. |
Image | Product name Product description |
Price |
|---|---|---|---|
| B6-01-00
|
More pictures |
Engine used for BMW 600, unchecked as removed, with built- or rather missing parts, Price on request from 500,00 Euro |
500.00 € per piece |
| B6-01-001
11110001080 |
More pictures |
Crankcase with studs, bearing bushing-clutch side, screen plate and short-circuit valve |
315.00 € per piece |
| B6-01-0015
11110001080 |
|
Crankcase with stud bolts, used, untested as removed, glass bead blasted, bearing bush coupling side, strainer plate with short circuit valve |
195.00 € per piece |
| B6-01-0016
11110001080 |
More pictures |
Crankcase used, blasted, all pipes cleaned with ultrasonic, thread and thread bolt checked |
245.00 € per piece |
| B6-01-002
11110001080 |
|
Subframe for holding the engine block or the complete engine for BMW 600 and BMW 700, for stable mounting |
49.90 € per piece |
| B6-01-003
11110001819 |
|
Bearing bushing for oil pump shaft, also B7-01-0029 |
9.90 € per piece |
| B6-01-008
11110001729 |
|
Nut for cylinder foot; zinc plated, original from old stock, also B7-01-009, inventory-managed under 1-0110 |
2.95 € per piece |
| B6-01-009
11110001120 |
|
Shaft sealing ring 52 x 72 x 10Si /alternatively article number.: 1-008, heat resistant, left hand twist, inventory-managed under 98-069 |
12.90 € per piece |
| B6-01-012
11110001864 |
|
Bearing bushing BMW No. 110001860, basic size |
49.90 € per piece |
| B6-01-0120
11110001861 |
|
Bearing bushing BMW No. 110001861, with oversize |
49.90 € per piece |
| B6-01-0125
11110001864 |
|
Bearing bushing used, unchecked as remove, basic size and oversize unsorted, BMW No. 110001860 and 861 |
29.90 € per piece |
| B6-01-013
11110001864 |
|
Gasket |
3.90 € per piece |
| B6-01-016
11110001864 |
|
Screen plate used, unchecked as remove, may be for repair |
8.50 € per piece |
| B6-01-0225
11140002081 |
More pictures |
Wheel house cover with lock plate, baffle plate, oil filler funnel and breather tube, used, glass bleaded, screw thread repaired, bearing seat ok, ready for installation |
169.90 € per piece |
| B6-01-024
11150001835 |
More pictures |
Oil funnel tube, used gebraucht, ungeprüft wie ausgebaut |
39.90 € per piece |
| B6-01-025
11430052885 |
|
Locking screw for oil funnel tube |
19.90 € per piece |
| B6-01-028
11150032830 |
|
Membrane for oil funnel tube, please refer 1-0931 |
6.95 € per piece |
| B6-01-029
11110032832 |
|
Pressure spring for membrane, please refer 1-0930 |
2.90 € per piece |
| B6-01-030
...0001808 |
|
Ventilation pipe |
19.50 € per piece |
| B6-01-033
11140002872 |
|
Gasket for wheel case cover, also B7-01-029 |
5.90 € per piece |
| B6-01-036
11140002800 |
More pictures |
Bearing cap |
99.90 € per piece |
| B6-01-041
11140002720 |
|
Flange at bearing shield |
14.80 € per piece |
| B6-01-043
11230070700 |
More pictures |
Damper complete, or B7-02-020 |
95.90 € per piece |
| B6-01-0430
11230070831 |
|
Bearing screw for damper, or B7-02-022 |
9.90 € per piece |
| B6-01-0431
11230070709 |
|
Ring shape spring element for damper, also B7-02-027 |
7.90 € per piece |
| B6-01-0432
11230070700 |
|
Fly wheel for damper also B7-02-021 |
19.90 € per piece |
| B6-01-0433
11230070710 |
|
Sliding washer for vibration damper, as in BMW original equipment also B7-02-028 |
9.90 € per piece |
| B6-01-0434
11230070710 |
|
B 10 disk for damper, or B7-02-024 |
0.40 € per piece |
| B6-01-0435
11230070710 |
|
Screv M 10 disk for damper, or B7-02-023 |
0.40 € per piece |
| B6-01-0436
11230070711 |
|
Terminating disk for damper, used, or B7-02-029 |
7.90 € per piece |
| B6-01-0437
11230070708 |
|
Hub for damper, or B7-02-026 |
4.90 € per piece |
| B6-01-0438
11230070704 |
|
Locking washer for damper, or B7-02-025 |
2.95 € per piece |
| B6-01-0440
11130007080 |
More pictures |
Oil pan with screw neck, aluminium |
115.50 € per piece |
| B6-01-0445
11130007085 |
Oil pan with screw neck, steel, used, unchecked as remove, also for BMW 700 |
10.00 € per piece |
|
| B6-01-0446
11130007080 |
Oil pan with screw neck, aluminium, used, unchecked as remove |
69.90 € per piece |
|
| B6-01-045
11430009800 |
|
Oil inspection stick |
19.90 € per piece |
| B6-01-047
11130007856 |
|
Oil pan gasket cork, also B7-01-036 |
9.50 € per piece |
| B6-01-050
11130007104 |
|
Oil drain screw on oil pan, also BMW.-Nos: 11130007106; 11130007715; 11130007710, also B7-01-039, 2-018; inventory-managed under 1-030 |
1.80 € per piece |
| B6-01-0500
11130007104 |
|
Oil drain screw Oil drain plug, magnetic, including sealing ring suitable for Isetta, BMW 600 and BMW700 also B7-01-0390, and 2-0180; inventory under 1-0300 |
5.90 € per piece |
| B6-01-051
11139963242 |
|
Seal ring for oil drain screw, also 4-008 and B7-01-040, inventory-managed under 1-031 |
0.35 € per piece |
| B6-01-053
11210016081 |
More pictures |
Crank shaft new from old Stock |
695.00 € per piece |
| B6-01-0530
11210016081 |
More pictures |
Crank shaft with connecting rod and roller bearing, overhauled The crank shaft has been generally overhauled in a precision shop/ specialized company for BMW crank shafts. If necessary, the bearing seats were set to increased measure by industrial hard chrome plating, followed by grinding to nominal dimension. All bearings including the connecting rod were replaced by original BMW new parts. |
695.00 € per piece |
| B6-01-0531
11210016081 |
|
crankshaft with con-rods for 600 ccm engine, defect, used, unchecked as remove, you have to rebuilt it in an authorized service center |
220.00 € per piece |
| B6-01-055
11210016802 |
|
Oil slinger D 110 x 45 x 16,3 x 6,4 mm, 5,5mm thick, clutch side |
49.90 € per piece |
| B6-01-0555
11210016802 |
Oil slinger D 110 x 45 x 16,3 x 6,4 mm, 5,5mm thick, clutch side, used |
39.90 € per piece |
|
| B6-01-056
11210016805 |
|
Oil slinger D 110 x 40 x 16,3 x 6,4 mm, 5,5mm thick, generator side |
39.90 € per piece |
| B6-01-0565
11210016805 |
Oil slinger D 110 x 40 x 16,3 x 6,4 mm, 5,5mm thick, generator side |
29.90 € per piece |
|
| B6-01-058
11210016748 |
|
Throw privat cylindrical, or B7-02-002 zylinderisch8, identischer Artikel siehe B7-02-002 |
39.90 € per piece |
| B6-01-059
11240017701 |
|
Connecting rod, or B7-02-005 identischer Artikel siehe B7-02-005 |
69.90 € per piece |
| B6-01-0605
11240017701 |
|
Connecting rod, Roller cage or Throw privot cylindrical, or B7-02-0055 11240017701 mit Hubzapfen 11210016748 und Rollenkäfig 11240017720 identischer Artikel siehe B7-02-0055 |
99.90 € per piece |
| B6-01-0615
07110016810 |
|
Needle bush for bearing of gear box and drive shaft in crank axle - clutch side, also B7-02-036 |
2.40 € per piece |
| B6-01-062
07119981251 |
|
Grooved ball bearing 6208 C3, also B6-03-124, inventory management under 99-040 |
11.90 € per piece |
| B6-01-063
11210016814 |
|
Spacer ring front |
9.90 € per piece |
| B6-01-064
|
More pictures |
Gear wheel fit "0" |
26.33 € per piece |
| B6-01-0645
|
Gear wheel fit "0" , used |
26.33 € per piece |
|
| B6-01-066
07119981234 |
Grooved ball bearing 6206 2Z, also B7-02-012, inventory-managed under 99-036 |
7.80 € per piece |
|
| B6-01-067
11140002199 |
|
Shaft sealing ring 28 x 40 x 7 BA, also B7-02-013, inventory-managed under 98-050 |
3.50 € per piece |
| B6-01-068
07119981258 |
Grooved ball bearing 6209 Z, inventory-managed under 99-041 |
15.90 € per piece |
|
| B6-01-069
11210016866 |
|
Spacer ring rear; outer diameter 55,0 mm, or B7-02-010 |
9.90 € per piece |
| B6-01-071
11210016832 |
|
Spring washer 45 x 56 mm D, x 0,5 mm thick |
4.90 € per piece |
| B6-01-072
11250012601 |
More pictures |
Piston Mahle, Nüral, Kolbenschmidt basic dimension 73.94 or 73.95 mm complete with piston rings piston pin and snap rings, ready for installation |
220.00 € per piece |
| B6-01-072002
11250012605 |
More pictures |
Piston Make: Nüral/Kolbenschmidt, basic size 73,92 mm, "Sport" |
125.00 € per piece |
| B6-01-0721
11250012605 |
More pictures |
piston Mahle, Nüral, Kolbenschmidt, 74.44 or 74.45 mm complete with piston rings piston pin and circlips, ready for installation |
220.00 € per piece |
| B6-01-07210
11250012605 |
|
Piston *** Sale Items *** original Asso 74,45 complete with piston rings and pin
|
220.00 € per piece |
| B6-01-0722
11250012611 |
More pictures |
Piston Mahle, Nüral, Kolbenschmidt 2.over size 74.94 or 74.95 mm complete with piston rings piston pin and circlips, ready for installation |
220.00 € per piece |
| B6-01-07220
11250012611 |
|
Piston original Asso 74,95 complete with piston rings and pin |
220.00 € per piece |
| B6-01-0723
11250012612 |
More pictures |
Mahle, Nüral, Kolbenschmidt 3rd oversize 75.44 or 75.45 mm complete with piston rings, piston pin and circlips, ready for installation Mahle, Nüral, Kolbenschmidt 3. Übermaß 75,44 bzw. 75,45 mm komplett mit Kolbenringe Kolbenbolzen und Sprengringe, einbaufertig |
220.00 € per piece |
| B6-01-074
07110014800 |
|
Sealing ring 2 mm, Nut 1, normal, 74,0 mm |
9.90 € per piece |
| B6-01-0740
07110014803 |
|
compression ring 2 mm, Nut 1, +0,5 mm grinding allowance |
9.90 € per piece |
| B6-01-0741
07110014806 |
|
Compression ring 2 mm, Nut 1, +1,0 mm grinding allowance |
9.90 € per piece |
| B6-01-0743
|
More pictures |
Piston rings Set, 74,0 mm, basic size |
39.90 € per set |
| B6-01-0744
|
Piston rings Set, 74,5 mm, 1. oversize |
39.90 € per piece |
|
| B6-01-0745
|
Piston rings Set, 75,0 mm, 2. oversize |
39.90 € per set |
|
| B6-01-0746
|
Piston rings Set, 75,5 mm, 3. oversize |
39.90 € per piece |
|
| B6-01-075
07110014810 |
|
Compression ring 2,5 mm, Nut 2, normal |
9.90 € per piece |
| B6-01-0752
07110014813 |
|
Compression ring 2,5 mm, Nut 2, +0,5 mm grinding allowance |
9.90 € per piece |
| B6-01-0753
07110014816 |
|
Compression ring 2,5 mm, Nut 2, +1,0 mm grinding allowance |
9.90 € per piece |
| B6-01-076
07110014818 |
|
Slit ring 4,0 mm, Nut 3, basic |
9.90 € per piece |
| B6-01-0760
07110014821 |
|
Slit ring 4,0 mm, Nut 3, + 0,5 mm grinding allowance |
9.90 € per piece |
| B6-01-0761
07110014824 |
|
Slit ring 4,0 mm, Nut 3, + 1,0 mm grinding allowance |
9.90 € per piece |
| B6-01-077
11110010081 |
More pictures |
Cylinder basic size, 74mm |
295.50 € per piece |
| B6-01-07720
11110010081 |
More pictures |
Cylinder 2. oversize, 75.00 mm, uncut, ready-to-install |
295.50 € per piece |
| B6-01-0774
11110010081 |
Cylinder Diameter 74,0 - 75,5 mm, necessary with missing pips, used part for a general overhaul, fit for Export engine |
125.00 € per piece |
|
| B6-01-07745
|
More pictures |
Cylinder / piston set cylinder with original Mahle/Nueral or Kolbenschmidt piston, as BMW initial equipping and ready for installation. The cylinder is ground and the piston fits this cylinder. |
790.00 € per set |
| B6-01-0775
|
More pictures |
Cylinder / Piston-Set cylinder readily ground on 74.00mm, with piston 73.94 mm d, ground size, ready-to-install |
395.00 € per piece |
| B6-01-07755
|
|
cylinder piston set used, for a 600ccm engine, piston 73,94 or rahter 73,95 mm, original Nürall, from an old engine, useful, This part will be sell if the customer check this part here on our side |
195.00 € per piece |
| B6-01-0776
|
|
Cylinder / Piston-Set cylinder readily ground on 74.50mm, with piston 74.44 mm d, first oversize, ready-to-install |
395.00 € per piece |
| B6-01-07765
|
|
cylinder piston set used, for a 600ccm engine, piston 74,43 or rahter 74,44 mm, original Nürall, from an old engine, useful, This part will be sell if the customer check this part here on our side |
195.00 € per piece |
| b6-01-0777
|
More pictures |
Cylinder / Piston-Set cylinder readily ground on 75.00mm, with piston 74.94 mm d, second oversize, ready-to-install |
395.00 € per piece |
| b6-01-0778
|
More pictures |
Cylinder / Piston-Set cylinder readily ground on 75.50mm, with piston 75.44 mm d, third oversize, ready-to-install |
395.00 € per piece |
| B6-01-078
11110010700 |
|
Protective pipe for valve push rod , used |
12.50 € per piece |
| B6-01-079
11110010811 |
More pictures |
Cylinder base gasket |
3.45 € per piece |
| B6-01-080
11120021080 |
More pictures |
Cylinder head right, with valve guide, valve seat insert, locking ring for valve guide, oil exhaust pipe, bushing for swing arm bearing etc., original new part |
220.00 € per piece |
| B6-01-0800
11120021083 |
More pictures |
Cylinder head left, with valve guide, valve seat insert, locking ring for valve guide, oil exhaust pipe, bushing for swing arm bearing etc., original new part |
220.00 € per piece |
| B6-01-0801
11120021080 |
More pictures |
Cylinder head right, with valve guide, valve seat insert, locking rings for valve guide, oil exhaust pipe, bushings for swing arm bearing and mounted inlet and outlet valve, original new part |
320.00 € per piece |
| B6-01-0802
11120021083 |
More pictures |
Cylinder head left, with valve guide, valve seat insert, locking ring for valve guide, oil exhaust pipe, bushing for swing arm bearing etc., original new part |
320.00 € per piece |
| B6-01-0806
11120021080 |
More pictures |
Cylinder head right, used, unchecked as remove, maybe for repair, provide for rebuild |
70.00 € per piece |
| B6-01-0807
11120021080 |
More pictures |
Cylinder head left, used, unchecked as remove, maybe for repair, provide for rebuild |
70.00 € per piece |
| B6-01-0808
11120021080 |
More pictures |
Cylinder head left, included Cylinder used, unchecked as remove, maybe for repair, provide for rebuild Picture 4; 5; 6; |
129.90 € per piece |
| B6-01-0809
11120021080 |
More pictures |
Cylinder head right, included Cylinder used, unchecked as remove, maybe for repair, provide for rebuild |
129.90 € per piece |
| B6-01-083
07119903390 |
|
Stud bolts also B7-1-046, inventory management under 1-060 |
1.25 € per piece |
| B6-01-0841
11534066522 |
|
Hex nut copper, for fixing exhaust pipe on cylinder head, made from copper, self-locking, key-width 12 mm due to enhanced mounting, also B6-02-102 and B7-12-046, inventory-managed under 1-071 |
0.40 € per piece |
| B6-01-087
11120021830 |
|
Sleeve for rocker arm bedding or B7-01-048 für Schwinghebellagerung, nicht identifiziert, evtl. 1-064; 1-065; B6-01-087; B6-01-088; B7-01-048; B7-01-049 |
49.90 € per piece |
| B6-01-088
11120021832 |
Sleeve with ring for rocker arm bedding or B7-01-049 mit Ringnut für Schwinghebellagerung, nicht identifiziert, evtl. 1-064;1-065; B6-01-087; B7-01-048; B7-01-049 |
49.90 € per piece |
|
| B6-01-089
11330021827 |
String seal for sleeve with ring groove, also B7-01-0505 für Hülse mit Ringnut, auch B7-01-0505 |
2.50 € per piece |
|
| B6-01-090
11120021841 |
More pictures |
Gasket between cylinder and cylinder head, also B7-01-0422, inventory-managed under 1-072 |
5.40 € per piece |
| B6-01-092
11120023150 |
Gasket to cylinder cover, also B7-01-062, inventory-managed under 1-067 auch B7-01-062, Bestandsführung unter 1-067 |
3.30 € per piece |
|
| B6-01-094
11120021156 |
More pictures |
Nut for gripping yoke, also B7-01-064, inventory-managed under 1-069 |
4.90 € per piece |
| B6-01-0945
11120021156 |
|
for tension bridge, used original part yellow galvanized, also B7-01-0645, inventory management under 1-0695 für Spannbrücke, gebrauchtes Originalteil gelbverzinkt, auch B7-01-0645, Bestandsführung unter 1-0695 |
1.95 € per piece |
| B6-01-096
11320033700 |
|
Tappet Basic size, also B7-02-049 |
29.90 € per piece |
| B6-01-0961
11320033700 |
|
Tappet 21.96 mm and 22.00, used, unsorted, as removed. Please specify the desired dimension, also B7-02-0491 |
22.50 € per piece |
| B6-01-0962
11320033703 |
|
Tappet 22.46 mm, also B7-02-0492 |
19.90 € per piece |
| B6-01-097
11320033174 |
|
Valve push rod, or B7-02-050 Stößelstange auch B7-02-050 |
12.50 € per piece |
| B6-01-0975
11320033174 |
|
Valve push rod used, unchecked as rebuilt, oe B7-02-0505 |
7.50 € per piece |
| B6-01-098
11110033814 |
More pictures |
Rubber bushing *** Sale Items *** for tappet guide, original BMW 600/700, no replica. Attention: please use only these original parts as replica will result in motor leaking, also B7-02-051
|
5.50 € per piece |
| B6-01-100
11330034176 |
Adjusting screw for swing arm |
4.89 € per piece |
|
| B6-01-106
11330021136 |
|
Hex screw also 1-074 and B7-02-059 file maintenance under 1-074 |
1.90 € per piece |
| B6-01-1065
11330021136 |
|
Hex screw used also 1-0745 and B7-02-0595 file maintenance under 1-0745 |
0.90 € per piece |
| B6-01-107
11340026110 |
|
Valve spring inner, also B7-02-060, inventory-managed under 1-086 |
3.90 € per piece |
| B6-01-1075
11340026110 |
|
Valve spring inner, used, also B7-02-0605, inventory-managed under 1-0865 |
1.95 € per piece |
| B6-01-108
11340026118 |
Valve spring outer, also B7-02-061, inventory-managed under 1-087 |
4.90 € per piece |
|
| B6-01-1085
11340026118 |
|
Valve spring outer, used, also B7-02-0615, inventory-managed under 1-0875 |
1.95 € per piece |
| B6-01-110
11340026832 |
|
Spring plate top, diameter 32.00/ 8.50mm, thickness: 9.60mm, inventory management under 1-089 |
7.90 € per piece |
| B6-01-111
11340026824 |
|
Half alve key also B7-02-068, inventory-managed under 1-090 |
1.70 € per piece |
| B6-01-112
11340026501 |
|
Inlet, incl. 2 pcs. wedge cone halves, inventory management under 1-091 Einlaß einschl. 2 Stück Keilkegelhälften, Bestandsführung unter 1-091 |
28.90 € per piece |
| B6-01-1121
11340026510 |
|
Valve cone outlet, steel-plated, also BMW.-Nr.: 11340026511, inventory-managed under 1-0913 |
46.90 € per piece |
| B6-01-113
11310031077 |
|
Control shaft |
99.50 € per piece |
| B6-01-1135
11310031077 |
|
Control shaft used |
59.50 € per piece |
| B6-01-114
07119981044 |
|
Grooved ball bearing 6004, also B7-02-070, inventory-managed under 99-014 |
3.90 € per piece |
| B6-01-116
07119981049 |
|
Grooved ball bearing 6005, also B6-04-122, B7-07-050 and B7-02-072, inventory-managed under 99-018 |
5.20 € per piece |
| B6-01-1199
|
More pictures |
Spur wheel for cam shaft, +4 |
31.59 € per piece |
| B6-01-11995
|
|
Spur wheel for cam shaft, 44 teath, used, unchecked as rebuilt |
39.90 € per piece |
| B6-01-124
11410052715 |
Gear wheel for oil pump, 42 teeth, serial number.: 102 110 80804 KN |
59.90 € per piece |
|
| B6-01-1245
11410052715 |
More pictures |
Gear wheel for oil pump, 42 teeth, serial number.:10211080604 KN, used |
39.90 € per piece |
| B6-01-127
11140052800 |
|
O-Ring for oil pump |
1.95 € per piece |
| B6-01-128
11140052811 |
|
Cover |
14.90 € per piece |
| B6-01-1285
11140052811 |
|
Cover, used Deckel, gebraucht |
5.30 € per piece |
| B6-01-131
11420052819 |
More pictures |
Oil filter Made in Germany, as used in original models BMW 600 and BMW 700, also B7-01-065 |
10.90 € per piece |
| B6-01-1310
11420052819 |
Oil filter no name product made by unknown manufacturer, not released by BMW, also B7-01-0650 |
9.90 € per piece |
|
| B6-01-132
11420052823 |
|
Sealing ring for cover, also B7-01-068 |
3.05 € per piece |
| B6-01-133
11420052827 |
|
Spring plate |
4.90 € per piece |
| B6-01-134
23511056116 |
|
Pressure spring |
3.61 € per piece |
| B6-01-135
11420052740 |
|
Cover used, untested as removed |
8.50 € per piece |
| B6-01-136
07119963106 |
|
Sealing ring A10 x 16 CU, please see 3-067 |
0.30 € per piece |
| B6-01-137
07119911624 |
|
Screw M10 x 1 x 15 8.8 Cad |
0.26 € per piece |
| B6-01-138
11420052836 |
|
O-ring for oil filter seal, also B7-01-069 |
1.10 € per piece |
| B6-01-140
11410052840 |
|
Gasket for oil pump, hole center distance: 25mm |
0.90 € per piece |
| B6-01-141
11410052840 |
|
for oil pump, hole center distance: 25mm für Ölpumpe, Lochabstand: ca.25 mm |
1.90 € per piece |
| B6-01-144
21210070080 |
More pictures |
Clutch pressure plate original F&S, 160 mm, new in exchange |
165.00 € per piece |
| B6-01-1446
21210070874 |
More pictures |
Clutch maschine for Sxomat, original F&S Schweinfurt, stamped type designation C5, 160mm diameter, probably in need of repair, as dismounted |
210.00 € per piece |
| B6-01-1447
21210070874 |
More pictures |
Clutch maschine for Sxomat, original F&S Schweinfurt, stamped type designation C5, diameter: 160mm, new in exchange |
290.00 € per piece |
| B6-01-145
11220068081 |
|
Flywheel for 160 driver disc Tread for oil seal 52 mm diameter |
198.50 € per piece |
| B6-01-1455
11220068081 |
More pictures |
Flywheel for 160 driver disc Tread for oil seal 52 mm diameter, used |
159.90 € per piece |
| B6-01-1457
11220068084 |
More pictures |
Flywheel, for Saxomat, original F&S Schweinfurt, diameter 160mm, used, unrepaired, probably in need of repair, as dismounted für Saxomat, original F&S Schweinfurt, 160 mm Durchmesser, gebraucht, unrepariert, evtl. reparaturbedürftig, wie ausgebaut. |
159.90 € per piece |
| B6-01-146
21510070800 |
|
Clutch release bearing also B7-02-095 |
84.50 € per piece |
| B6-01-1475
21530070877 |
|
Spring also BMW Nos: 2151070805 and 21510070754 |
4.20 € per piece |
| B6-01-148
21210670760 |
More pictures |
Clutch lining for riveting on, 1 set = 2 pieces, diameter 160mm, incl. necessary rivets, suitable for Fichtel & Sachs and LUK |
32.50 € per set |
| B6-01-1480
21210070082 |
More pictures |
clutch disk, original F&S, general overhauled in an authorized service center, only in exchange original F&S 160 mm, in einem Fachbetrieb generalüberholt, einbaufertig, nur im Austausch |
149.90 € per piece |
| B6-01-1481
21210070084 |
More pictures |
coupling disk with grain, orignial F&S, for saxomat, only in exchange |
149.90 € per piece |
| B6-01-1485
21210070084 |
pressure tank for saxomat, original F&S Schwinfurt, used, unchecked as remove, maybe for repair |
89.90 € per piece |
|
| B6-01-1487
21530039843 |
vacuum box on support structure for saxomat, original F&S Schwinfurt, used, unchecked as remove, maybe for repair |
49.90 € per piece |
|
| B6-01-149
21530070864 |
More pictures |
Pressurized container for Saxomat, orignial F&S Schweinfurt, consisting of picture number 34,35 and 46, used, probably need of repair, not checked, as dismounted |
140.00 € per piece |
| B6-01-150
21530070878 |
More pictures |
Control valve for Saxomat, original F&S Schweinfurt, consisting of picture number 39, used, probably need of repair, not checked, as dismounted |
140.00 € per piece |
| B6-01-152
11220016858 |
|
Hex screw
Dehnschraube M 9x24mm
Schaftlänge: 7 mm
Gewindelänge: 17 mm
Schlüsselweite: 15 mm
Ribe 10K oder Verbus 10K Für die Schwungscheibenbefestigung an der Kurbelwelle Dehnschraube M 9x24mm Schaftlänge: 7 mm Gewindelänge: 17 mm Schlüsselweite: 15 mm Ribe 10K oder Verbus 10K |
4.20 € per piece |
| B6-01-1528
11220016858 |
|
Hex screw
Dehnschraube M 10x20mm
Schaftlänge: 5 mm
Gewindelänge: 15 mm
Schlüsselweite: 17 mm
Ribe 12K Für die Schwungscheibenbefestigung an der Kurbelwelle Dehnschraube M 10x20mm Schaftlänge: 5 mm Gewindelänge: 15 mm Schlüsselweite: 17 mm Ribe 12K |
4.20 € per piece |
| B6-01-1535
11570093800 |
More pictures |
Blower cover used, glass bleaded, unchecke as remove |
69.90 € per piece |
| B6-01-154
11570093850 |
More pictures |
Blower cap |
59.90 € per piece |
| B6-01-1545
11570093850 |
|
Blower cap, used, with slightly defective guard, hobbyists part gebraucht, mit leicht defektem Schutzgitter, Bastlerteil |
39.90 € per piece |
| B6-01-155
11570093750 |
More pictures |
Hutch also B7-01-084 // BMW.-Nos.: 11810093750 and 11810093859 |
89.90 € per piece |
| B6-01-1555
11570093750 |
More pictures |
Hutch also B7-01-084 // BMW.-Nos.: 11810093750 and 11810093859, used, unrepaired as dismounted |
59.90 € per piece |
| B6-01-1610
11570093881 |
More pictures |
Air guide left, lower |
89.90 € per piece |
| B6-01-1611
11570093881 |
More pictures |
Air guide left, lower with short air connection, without long hole, used, unrepaired, as dismounted |
69.90 € per piece |
| B6-01-1613
11570093881 |
More pictures |
Air guide left, lower, at the bottom with long air nozzle, without long hole, used, unrepaired, as dismounted |
69.90 € per piece |
| B6-01-1615
11570093881 |
More pictures |
Air guide left, lower, at the bottom with long air nozzle, with long hole, used, unrepaired, as dismounted |
69.90 € per piece |
| B6-01-1616
11570093886 |
More pictures |
Air guide right, lower |
89.90 € per piece |
| B6-01-1617
11570093886 |
More pictures |
Air guide right, lower with hole, diameter: 45mm, with recess in the outer plating, used, unrepaired, as dismounted |
69.90 € per piece |
| B6-01-1620
11570093883 |
More pictures |
Air guide left, upper |
89.90 € per piece |
| B6-01-1621
11570093883 |
More pictures |
Air guide left, upper, used, unrepaired, as dismounted |
69.90 € per piece |
| B6-01-1625
|
More pictures |
Felt plates for air shield |
12.20 € per piece |
| B6-01-16250
|
|
Felt plates for air shield |
12.20 € per piece |
| B6-01-1626
11570093889 |
Air guide right, upper |
89.90 € per piece |
|
| B6-01-1627
11570093889 |
More pictures |
Air guide right, upper, used, unrepaired, as dismounted |
69.90 € per piece |
| B6-01-1628
11570093889 |
More pictures |
Air guide right, upper, similar to B6-01-1627, but with short mounting plate, new spare part |
89.90 € per piece |
| B6-01-1629
11570093889 |
More pictures |
Air guide right, upper, similar to B6-01-1627, but with short mounting plate, used, unrepaired, as dismounted |
69.90 € per piece |
| B6-01-164
11810097360 |
More pictures |
Floor panel left, new original part |
165.00 € per piece |
| B6-01-1641
11810097360 |
More pictures |
Floor panel left, in need of repair, possibly as sample |
69.90 € per piece |
| B6-01-16410
11810097360 |
|
floor panel Part, in need of repair, unrepaired, as removed, left |
49.90 € per piece |
| B6-01-165
11810093761 |
More pictures |
Floor panel right, new original part |
165.00 € per piece |
| B6-01-1651
11810093761 |
More pictures |
Floor panel right, in need of repair, possibly as sample |
69.90 € per piece |
| B6-01-16510
11810093761 |
|
Floor panel Part, in need of repair, unrepaired, as removed, right side |
49.90 € per piece |
| B6-01-166
11810093763 |
More pictures |
Floor panel right, black coated (also no. 11810093854) |
49.90 € per piece |
| B6-01-1660
11810093763 |
More pictures |
Floor panel rear, used |
29.90 € per piece |
| B6-01-1665
11810093763 |
|
Floor panel rear, used, unchecked as restored, with hole for heater hose. Hole diameter 47 mm |
19.90 € per piece |
| B6-01-167
11810093870 |
More pictures |
Cap at floor panel, upper |
49.90 € per piece |
| B6-01-1670
11810093870 |
More pictures |
Cap at floor panel, upper, with joun at the outside of the screw mounting holes, used, unrepaired, as dismounted |
39.90 € per piece |
| B6-01-1675
11810093870 |
More pictures |
Cap at floor panel, upper, without join at the outside of the screw mounting holes |
49.90 € per piece |
| B6-01-1677
11810093870 |
More pictures |
Cap at floor panel, upper, without join at the outside of the screw mounting holes, used, unrepaired, as dismounted |
39.90 € per piece |
| B6-01-168
....0093878 |
More pictures |
Sealing *** Sale Items *** for floor panel in engine compartment, original BMW quality!
|
49.90 € per piece |
| B6-01-300
11009090567 |
More pictures |
Engine gaskets complete, including shaft seals, and 4 tappet rubbers |
64.50 € per set |
| B6-02-083
11610042500 |
Gasket, aluminum *** Sale Items *** inventory-managed under 1-109
|
2.25 € per piece |
|
| B6-02-087
13720043524 |
|
Air filter cartridge *** Sale Items *** metal, BMW standard, made in Germany, inventory-managed under 1-168
|
9.90 € per piece |
| B6-02-088
13720043540 |
|
Seal ring for air filter, inventory-managed under 1-1671 |
1.65 € per piece |
| B6-03-124
07119981251 |
|
Grooved ball bearing 6208 C3, also B6-01-062, inventory management under 99-040 |
11.90 € per piece |
| B6-04-053
07119981213 |
Grooved ball bearing 6203, also B6-04-053 and 3-045, inventory-managed under 99-023 |
4.80 € per piece |
|
| B7-01-0029
11110001819 |
|
Bearing bushing for oil pump shaft, also B6-01-003 |
9.90 € per piece |
| B7-01-084
11570093750 |
More pictures |
Hutch Inventory management under B6-01-155 |
89.90 € per piece |
| B7-01-0845
11570093750 |
More pictures |
Hutch Inventory management under B6-01-1555, used, unrepaired as removed |
59.90 € per piece |
| B7-02-002
11210016748 |
|
Throw privat cylindrical, or B6-01-058 zylinderisch8, identischer Artikel siehe B6-01-058, Bestandsführung unter B6-01-058 |
39.90 € per piece |
| B7-02-005
11240017701 |
|
Connecting rod, or B6-01-059 identischer Artikel siehe B6-01-059, Bestandsführung unter B6-01-059 |
69.90 € per piece |
| B7-02-0055
11240017701 |
|
Connecting rod, Roller cage or Throw privot cylindrical, or B6-01-0605 11240017701 mit Hubzapfen 11210016748 und Rollenkäfig 11240017720 identischer Artikel siehe B6-01-0605, Bestandsführung unter B6-01-0605 |
99.90 € per piece |
| B7-02-020
11230070700 |
More pictures |
Damper complete, stock number B6-01-043 |
95.90 € per piece |
| B7-02-021
11230070700 |
|
Fly wheel for damper, stock number B6-01-0432 |
19.90 € per piece |
| B7-02-022
11230070831 |
|
Bearing screw for damper, stock number B6-01-0430 |
9.90 € per piece |
| B7-02-023
11230070710 |
|
Screv M 10 disk for damper, stock number 20-00315 |
0.40 € per piece |
| B7-02-024
11230070710 |
|
B 10 disk for damper, stock number B6-01-0434 |
0.40 € per piece |
| B7-02-025
11230070704 |
|
Locking washer for damper, stock number B6-01-0438 |
2.95 € per piece |
| B7-02-026
11230070708 |
|
Hub for damper, stock number B6-01-0437 |
4.90 € per piece |
| B7-02-028
11230070710 |
|
Sliding washer for vibration damper, as in BMW original equipment, stock number B6-01-0433 |
9.90 € per piece |
| B7-02-029
11230070711 |
|
Terminating disk for damper, used, stock number B6-01-0436 |
7.90 € per piece |
| B7-02-049
11320033700 |
|
Tappet basic size, stock management under B6-01-096 |
29.90 € per piece |
| B7-02-0491
11320033700 |
|
Tappet 21.96 mm and 22.00, used, unsorted, as removed. Please indicate the desired dimension. Stock management under B6-01-0961 |
22.50 € per piece |
| B7-02-0492
11320033703 |
|
Tappet 22.46 mm, inventory management under B6-01-0962 |
19.90 € per piece |
| B7-02-050
11320033174 |
|
Valve push rod, or B7-02-050, or B6-01-097 Stößelstange, Bestandsführung unter B6-01-097 |
12.50 € per piece |
| B7-02-0505
11320033174 |
|
Valve push rod used, unchecked as rebuilt B6-01-0975 |
7.50 € per piece |